IK Multimedia has spent the last decade developing studio monitors for producers working in smaller spaces, and its original iLoud Micro Monitor was one of the first products to convince many engineers that compact desktop speakers could be taken seriously for production work. Now, ten years after the original arrived in 2016, the company has announced the iLoud Micro Monitor 2, a completely redesigned monitoring system that brings several technologies from its higher-end speakers into a much smaller and considerably less expensive package.

The biggest addition is built-in ARC X room correction, which allows producers to measure their listening environment and store a calibrated response directly inside the speakers. Alongside that comes a new linear-phase crossover, redesigned drivers, updated amplification, USB-C audio, Bluetooth connectivity, and a companion mobile app for adjusting speaker settings.

Considering the original Micro Monitor series has sold over 250,000 speakers, according to IK Multimedia, there’s already a considerable audience familiar with the format, and this update addresses several limitations of the original design.

I’ve spent a fair amount of time working with IK Multimedia’s higher-end monitoring systems, particularly the iLoud MTM MKII and iLoud Sub, and the company’s approach to integrating room correction directly into monitoring hardware has been one of the more convincing developments I’ve encountered in affordable studio equipment. Bringing that technology to a $349.99 pair is an appealing proposition, particularly for producers working from bedrooms, smaller production rooms, and temporary setups where speaker placement and acoustic treatment can be difficult to manage.

ARC X Room Correction Comes to the Standard Micro Monitor

Room correction is the most consequential addition to the iLoud Micro Monitor 2, particularly when considering its intended audience. Producers working with limited desk space are frequently placing speakers near walls, on reflective surfaces, or in rooms that were never designed for critical listening. Those conditions introduce frequency-response problems that can make bass balancing and EQ decisions considerably harder than they need to be.

The new monitors integrate IK Multimedia’s ARC X correction system, which uses measurements captured with a compatible microphone to calculate a correction profile for the listening environment. That profile is stored directly in the speakers’ internal DSP, meaning the corrected response remains active during playback without requiring a separate room-correction processor or a plugin running inside a DAW.

This technology has become a familiar part of my production setup. When I reviewed the iLoud MTM MKII, the built-in calibration system was one of the features I appreciated most, especially because I had already moved away from Sonarworks after adopting IK Multimedia’s standalone correction hardware. Having that same general approach incorporated into a compact system at this price is an interesting development for producers who want to improve their monitoring without purchasing additional equipment.

The company introduced built-in correction to its smaller speakers with the Micro Monitor Pro, which we covered in our previous review. The important distinction with Micro Monitor 2 is that much of this functionality is now available in a less expensive system intended for everyday desktop production.

USB-C Audio, Bluetooth, and Mobile Control

Connectivity has also received some attention, with USB-C digital audio allowing the monitors to connect directly to a laptop or desktop computer without requiring a separate audio interface for playback. RCA analog inputs remain available for connecting interfaces, mixers, and other audio equipment, while Bluetooth provides wireless playback from compatible devices.

USB-C has become increasingly common on compact monitoring systems, and when I reviewed the ADAM Audio D3V, direct digital connectivity was one of the features that made the speakers particularly convenient for portable setups. The same reasoning applies here, especially for producers who move between workstations or want to keep a second pair of speakers connected to a laptop.

The iLoud Micro Monitor 2 also introduces the iLoud Control app for iOS and Android, allowing users to select speaker voicings, adjust EQ, manage firmware updates, and change system settings without reaching behind the monitors. Presets account for conditions such as desktop placement, speaker stands, nearby walls, and corners, while ARC X provides additional control through its calibration and six-band EQ functions.

Physically, the monitors measure 98 × 182 × 140 mm, with a combined pair weight of approximately 2.06 kg. Integrated isolation tilt-bases help direct the speakers toward the listening position, and 3/8-inch mounting points provide compatibility with stands and other mounting hardware.

One detail worth mentioning is that the system uses an active speaker connected to a passive speaker through an included two-meter, four-pin mini-DIN cable. That differs from the individually powered Micro Monitor Pro and means the placement of each speaker needs to accommodate the connecting cable.

For a permanent desk, this arrangement should be relatively straightforward, although anyone planning to use the monitors in a larger or unusually arranged space should account for that connection before purchasing.

Pricing, Availability, and Where Micro Monitor 2 Fits

IK Multimedia has opened preorders for the iLoud Micro Monitor 2, with shipping scheduled to begin in December 2026.

The standard package costs $349.99 or €349.99 per pair and includes the ARC measurement microphone. A second configuration without the microphone has been announced at $299.99 or €299.99 for existing owners of a compatible ARC microphone. Prices exclude applicable taxes.

At $349.99, the new monitors enter a competitive part of the desktop monitoring market, where models such as the ADAM Audio D3V already provide compact dimensions and USB-C connectivity. The Micro Monitor 2 distinguishes its feature set through integrated measurement-based room calibration, linear-phase processing, and access to IK Multimedia’s broader ARC X system.

There are compromises worth considering. The 3-inch drivers still impose limits on low-frequency reproduction, RCA connections mean conventional balanced analog inputs are absent, and the active/passive configuration is less flexible than independently powered monitors. Bluetooth is best reserved for casual listening and reference playback, particularly when latency becomes a concern during production.

The iLoud Micro Monitor 2 is available for preorder through IK Multimedia’s official website, with shipping expected in December 2026.

Profile picture of Will Vance
By
Will Vance is a professional music producer who has been involved in the industry for the better part of a decade and has been the managing editor at Magnetic Magazine since mid-2022. In that time period, he has published thousands of articles on music production, industry think pieces and educational articles about the music industry. Over the last decade as a professional music producer, Will Vance has also ran multiple successful and highly respected record labels in the industry, including Where The Heart Is Records as well as having launched a new label with a focus on community through Magnetic Magazine. When not running these labels or producing his own music, Vance is likely writing for other top industry sites like Waves or the Hyperbits Masterclass or working on his upcoming book on mindfulness in music production. On the rare chance he's not thinking about music production, he's probably running a game of Dungeons and Dragons with his friends which he has been the dungeon master for for many years.
[DISPLAY_ULTIMATE_SOCIAL_ICONS]